Welcome to the New Web Site of Onduline Avrasya
 |
 |
 |
Certificates (CE, TSE, ISO)
System Ondusolar
System Ondusolar
Roofs Covered With Isoline + Ardoise
 |
|||||||
Required Components For Installation |
|||||||
|
|||||||
| * For fixing of the PV panels to the mounting components, the accessories recommended by panel manufacturer have been used. ** The details of the brochure cover installations made on OSB. All supports can be fixed also to other substructures such as concrete slabs, timber or steel battens or purlins by the use of proper connection elements. |
|||||||
Steps of Installation |
|||||||
 |
 |
||||||
|
1- Connect Omega 1, MP 20 and cruciform bracket with insulating strips to each other before fixing them to the roof 2- Place the first group so that the distance between the middle of Omega 1 and the clever batten is 9 cm as shown in the illustration above. (**) |
3- The slates at both sides of the ONDUSOLAR panel have to enter the area covered by the panels for min. 10 cm. |
||||||
 |
 |
||||||
|
4- Fix the mounting rail to cruciform bracket. 5- Put 2 pcs. of PV module holder for each panel. |
6- Fix the aluminium angle between PV module holder and ONDUSOLAR panel in order to provide an esthetical overlap in front of the PV panels. 7-Fix retaining brackets with the use of anchor blocks on both sides of each ONDUSOLAR panel. |
||||||
 |
 |
||||||
 |
 |
||||||
